Collection of the station | Site map |
contact us | 
簡(jiǎn)體中文
ChinaLatex additivesIntegrated supplier
MajorSolar Energy EVA Rubber mould assistantsupplier
Advisory Service Hotline
86-021-61317011
address：No. 210, Longchang Road, Yangpu District, Shanghai,China
Tel：86-021-61317011
fax：86-021-65378681
mobile：13917881220 17701607391 (rubber additive) 18616710227 (plastic additives)
Zip code：200080
contacts：Miss Shen Mr wang Mr Zhou
E-mail:dm@shdunmei.com
UV irradiated oil
Property description:
This product is soluble in most organic solutions, insoluble in water, with a flash point of 174 ℃ and toxicity data of LDmgkg: 21200
Quality indicators:
Project indicators
Liquid powder
Appearance (visual inspection) colorless or light yellow transparent liquid, white block solid or powder
Solid content: ＞ 98.5% 60%
Density 25 ℃ g/cm/
Acid value, mgKOH/g,≤ 0.5/
Chromaticity, APHA,≤ 50/
Moisture:≤ 0.2%/
Purpose:
Vulcanizing agent
When vulcanizing synthetic rubber with peroxide, using TMPTMA can improve corrosion resistance, aging resistance, and hardness. The heat resistance of TMPTMA during mixing has a plasticizing effect, while the original hardening effect of vulcanization can be used for NBR, EPDM, and acrylic rubber.
crosslinking agent
TMPTMA can reduce Radiation exposure, shorten radiation time, improve cross-linking density, and has the characteristics of low precision, high cross-linking degree, low steam pressure and fast curing speed. It can be used for UV curable inks and photopolymerization materials.
PVC
Blended into the molding of all PVC solutions used for car body sealing and sealing agents. For example: 100 portions of PVC, 60 portions of DOP, 2-4 portions of stabilizer, 0.02-0.6 portions of Organic peroxides, and 5-30 portions of TMPTMA
Wire coating materials
Used as a color coating material for electric wires - a cross-linking agent of PVC resin, a heat-resistant and tough film can be produced by coating a very thin layer of color on thin wires
Recommended dosage:
When using general rubber as a crosslinking agent (bridging agent), it is recommended to add 2-4PHR
It is recommended to add 0.5-1.0 PHR in EVA foam products
In high hardness products, it is recommended to add 10-20PHR
Storage and transportation: The storage temperature is 16-27 ℃, avoiding direct sunlight. Avoid contact with oxidants and free radicals. Dark colored PE drums can be used for storage, and a certain space should be left in the container to meet the oxygen needs of the polymerization inhibitor. The best results are achieved within six months of use. Transport as non hazardous materials
Packaging: 25kg/barrel (liquid) 200kg/barrel (liquid) 25kg/bag (powder)
